Comparing volumetric and biological aspects of 3D-printed interim restorations under various post-curing modes

Purpose@#This study aims to compare the volumetric change, degree of conversion (DOC), and cytotoxicity of 3D-printed restorations post-cured under three different conditions. Materials and Methods: 3D-printed interim restorations were post-cured under three different conditions and systems: 5 min, 30 min, and 24 h. Three-unit and six-unit fixed dental prostheses (n = 30 for each case) were printed; ten specimens from each group were post-cured and then scanned to compare their volumetric changes. Root-mean-squared (RMS) values of the data were acquired by superimposing the scanned files with original files.Thirty disk-shaped specimens were printed to evaluate the DOC ratio. Fourier transform infrared spectroscopy was used to compare the DOCs of 10 specimens from each group. Human gingival fibroblasts were used to measure the cell viability of every specimen (n = 7). The data from this experiment were employed for one-way analysis of variance and Tukey’s post-hoc comparisons. @*Results@#Differences between the three-unit restorations were statistically insignificant, regardless of the post-curing conditions. However, for the six-unit restorations, a high RMS value was acquired when the post-curing duration was 30 min. The average DOC was approximately 56 - 62%; the difference between each group was statistically insignificant. All the groups exhibited cell viability greater than 70%, rendering them clinically acceptable. @*Conclusion@#The post-curing conditions influenced the volume when the length of the restoration was increased. However, this deviation was found to be clinically acceptable. Additionally, postcuring did not significantly influence the DOC and cytotoxicity of the restorations.

Comparing volumetric and biological aspects of 3D-printed interim restorations under various post-curing modes

Purpose@#This study aims to compare the volumetric change, degree of conversion (DOC), and cytotoxicity of 3D-printed restorations post-cured under three different conditions. Materials and Methods: 3D-printed interim restorations were post-cured under three different conditions and systems: 5 min, 30 min, and 24 h. Three-unit and six-unit fixed dental prostheses (n = 30 for each case) were printed; ten specimens from each group were post-cured and then scanned to compare their volumetric changes. Root-mean-squared (RMS) values of the data were acquired by superimposing the scanned files with original files.Thirty disk-shaped specimens were printed to evaluate the DOC ratio. Fourier transform infrared spectroscopy was used to compare the DOCs of 10 specimens from each group. Human gingival fibroblasts were used to measure the cell viability of every specimen (n = 7). The data from this experiment were employed for one-way analysis of variance and Tukey’s post-hoc comparisons. @*Results@#Differences between the three-unit restorations were statistically insignificant, regardless of the post-curing conditions. However, for the six-unit restorations, a high RMS value was acquired when the post-curing duration was 30 min. The average DOC was approximately 56 - 62%; the difference between each group was statistically insignificant. All the groups exhibited cell viability greater than 70%, rendering them clinically acceptable. @*Conclusion@#The post-curing conditions influenced the volume when the length of the restoration was increased. However, this deviation was found to be clinically acceptable. Additionally, postcuring did not significantly influence the DOC and cytotoxicity of the restorations.

Chairside computer-aided design/computer-aided manufacturing (CAD/ CAM)-based restoration of anterior teeth with customized shade and surface characterization: a report of 2 cases

Over the last 30 years, the use of chairside computer-aided design (CAD) and computer-aided manufacturing (CAM) systems has evolved and has become increasingly popular in dentistry. Although CAD/CAM restorations have been used in the anterior dentition, satisfying the esthetic requirements of clinicians and patients, where the restorations are limited to the chairside, remains a challenge. To reproduce multi-shades of CAD/CAM restorations in the clinic, a preliminary experiment to express several shades on A2 lithium disilicate (LS2) blocks using a staining kit was performed. After measurement of the CIE L*a*b* value of specimens, it was compared with that of the commercial shade guide. This report presents two cases with individual customization of shade and surface characterization of the CAD/CAM restorations using predictable methods based on the preliminary experimental data. The anatomical shape of restoration was obtained from ‘copy and paste technique’ and ‘mirror image acquisition technique’. All treatment procedures and fabrication of restorations performed in this report were executed in the clinic itself.

Oral manifestation and root canal therapy of the patient with mucopolysaccharidosis

Mucopolysaccharidosis (MPS) is an inherited metabolic disorder caused by a deficiency in enzymes that participate in the degradation of glycosaminoglycans (GAGs) such as heparin sulfate and dermatan sulfate. Left untreated, patients show progressive mental and physical deterioration due to deposition of GAGs in organs. Death often occurs due to cardiac or respiratory failure before patients reach their early twenties. MPS has several oral and dental manifestations. An enlarged head, short neck, and open mouth associated with a large tongue are major characteristics of MPS patients. Dental complications can be severe, including unerupted dentition, dentigerous cyst-like follicles, malocclusions, condylar defects, and gingival hyperplasia. A 21-year-old female patient with MPS was described in this article, with special emphasis on oral manifestations and dental treatment.

Effects of various root canal sealers on tooth discoloration and internal bleaching / 대한치과재료학회지

There are several causes of tooth discoloration following root canal treatment. In this study, we evaluated the effects of sealers on tooth discoloration and internal bleaching. Twenty-four teeth were divided into 4 groups: control group, AH plus, Endosequece BC, and MTA fillapex group. Root canal filling was performed using each sealer conventionally and non-vital bleaching was performed with sodium perborate. The L, a, and b values were measured using Vita easyshade. Tooth discoloration after root canal treatment occurs irrespective of the type of sealers and may cause discoloration with only gutta-percha cone. The effect of non-vital bleaching following the use of calcium silicate-based sealers such as Endosequece BC and MTA fillapex was higher than that of AH plus. Therefore, it needs careful use of sealers in endodontics and calcium silicate-based sealers have advantages of bleaching in case of discolored tooth.

Effects of RetroMTA on osteoblastic differentiation in MC3T3-E1 cells / 대한치과재료학회지

Mineral trioxide aggregate (MTA) provides a very good sealing, acceptable biocompatibility, dentin bridge formation and osteo-inductive effect. However, MTA has a few drawbacks. RetroMTA including calcium-zirconia complex has been developed to overcome drawbacks of MTA, especially long setting time and difficult handling characteristics. Therefore, the aim of this study was to evaluate the effects of RetroMTA on biocompatibility, osteogenic differentiation and mineralization in MC3T3-E1 cells compared with conventional MTA. Cytotoxicity was assessed by WST-1 assay. The gene expression of osteogenic markers was detected by real-time PCR. ALP activity and mineralization behavior were evaluated using ALP and alizarin red staining. There was no statistically significant difference between ProRoot MTA and RetroMTA with material extracts at dilutions of 1/4, 1/10 and 1/50 in cell viability assay. Expression of osteogenic markers in both ProRoot MTA and RetroMTA groups was significantly higher than in control group. In the mineralization assay, RetroMTA showed significantly higher formation of mineralized nodules than in control. In conclusion, RetroMTA promotes osteogenic differentiation and potential mineralization. It appears to be a potential alternative to ProRoot MTA as a root-end filling material.

Successful laparoscopic management of uterine serosal pregnancy

Uterine serosal pregnancy is an extremely rare form of ectopic pregnancy. This is a report of a 35-year-old primigravida woman who was diagnosed with uterine serosal pregnancy via laparoscopic intervention. A 35-year-old woman (gravida 1, para 0) was referred from a local clinic for a ruptured left tubal pregnancy at amenorrhea 5+0 weeks with elevated serum beta human chorionic gonadotropin (16,618 mIU/mL). A pregnancy on the left posterior wall of the uterine serosa was diagnosed during the operation and successfully treated with laparoscopic surgery as a conservative management strategy to enable fertility preservation. With the advantages of ultrasonography and laparoscopy, an early diagnosis of a primary abdominal pregnancy located on the left posterior wall of the uterine serosa was made, prior to the occurrence of severe intra-abdominal massive hemorrhage, which was then treated laparoscopically as a conservative management strategy enabling the preservation of fertility.

Predictors of Distant Metastasis after Radical Surgery Followed by Postoperative Radiotherapy with or without Chemotherapy for Oropharyngeal Cancer / Journal of the Korean Cancer Association, 대한암학회지

PURPOSE: We investigated the prognostic factors for distant metastasis (DM) in patients with locally advanced oropharyngeal cancer (OPC) treated with surgery and adjuvant radiotherapy with or without concurrent chemotherapy. MATERIALS AND METHODS: Eighty-five patients treated between January 1995 and August 2014 were evaluated retrospectively. Data regarding the pathological tumour and nodal status, human papillomavirus (HPV) status, treatment characteristics, and pretreatment maximum standardized uptake value (SUVmax) of 18-fluoro-2-deoxyglucose positron emission tomography–computed tomography scan (¹⁸F-FDG PET-CT) were evaluated, and their influence on DM and survival outcomes were analyzed. RESULTS: Median follow-up period was 48.0 months. Recurrence was observed in 20 patients, including locoregional recurrence and DM. DM was observed in 13 patients. A multivariate analysis confirmed that the presence of lymphovascular invasion (p=0.031), lower neck lymph node (LN) involvement (p=0.006), SUVmax ≥ 9.7 (p=0.014), and tumour size ≥ 3 cm (p=0.037) significantly affected DM. HPV status was not associated with DM. Perineural invasion (p=0.048), lower neck LNinvolvement (p=0.008), SUVmax ≥ 9.7 (p=0.019), and tumour size ≥ 3 cm (p=0.033) were also significant factors for the DM-free survival rate. CONCLUSION: Lower neck LN involvement, high SUVmax in pretreatment ¹⁸F-FDG PET-CT, and large tumour size were predictive factors for DM in patients of OPC.

In vitro characterization of human dental pulp stem cells isolated by three different methods

OBJECTIVES: In this study, we characterized human dental pulp cells (HDPCs) obtained by different culture methods to establish the most suitable methodology for dental tissue engineering and regenerative endodontic applications. MATERIALS AND METHODS: HDPCs were isolated by the outgrowth method (HDPCs-OG), the enzymatic digestion method (collagenase/dispase/trypsin, HDPCs-ED), or the combination of both methods (HDPCs-Combined). The expression of mesenchymal stem cell markers (CD105, CD90, and CD73) was investigated. In vitro differentiation capacities of HDPCs into adipogenic, osteogenic, and chondrogenic lineages were compared. Differentiation markers were analyzed by quantitative reverse-transcription polymerase chain reaction (RT-PCR) and western blotting. RESULTS: Our data indicated that whole HDPCs-ED, HPDCs-OG, and HDPCs-Combined could be differentiated into adipogenic, chrondrogenic, and osteogenic cell types. However, we found that the methods for isolating and culturing HDPCs influence the differentiation capacities of cells. HDPCs-OG and HDPCs-ED were preferably differentiated into adipogenic and osteogenic cells, respectively. Differentiation markers shown by RT-PCR and western blotting analysis were mostly upregulated in the treated groups compared with the control groups. CONCLUSIONS: Our findings confirmed that cell populations formed by two different culture methods and the combined culture method exhibited different properties. The results of this study could provide an insight into regenerative endodontic treatment using HDPCs.

Surgical endodontic management of infected lateral canals of maxillary incisors

This case report presents surgical endodontic management outcomes of maxillary incisors that were infected via the lateral canals. Two cases are presented in which endodontically-treated maxillary central incisors had sustained lateral canal infections. A surgical endodontic treatment was performed on both teeth. Flap elevation revealed vertical bone destruction along the root surface and infected lateral canals, and microscopy revealed that the lateral canals were the origin of the lesions. After the infected lateral canals were surgically managed, both teeth were asymptomatic and labial fistulas were resolved. There were no clinical or radiographic signs of surgical endodontic management failure at follow-up visits. This case report highlights the clinical significance and surgical endodontic management of infected lateral canal of maxillary incisor. It is important to be aware of root canal anatomy variability in maxillary incisors. Maxillary central incisors infected via the lateral canal can be successfully managed by surgical endodontic treatment.

Clinical management of a fused upper premolar with supernumerary tooth: a case report

In dentistry, the term 'fusion' is used to describe a developmental disorder of dental hard tissues. In the permanent dentition, fusion of a normal tooth and a supernumerary tooth usually involves the incisors or canines. However, a few cases of fusion involving premolars have also been reported to date. We present a rare case in which fusion of the maxillary left second premolar and a supernumerary tooth in a 13-year-old girl was diagnosed using cone beam computed tomography (CBCT, Alphard-3030, Asahi Roentgen Ind. Co., Ltd.). The tooth was bicuspidized after routine nonsurgical root canal treatment, and the separated teeth underwent appropriate restoration procedures. The second premolar and supernumerary tooth remained asymptomatic without any signs of inflammation after a follow-up period of 9 years. Identification of anatomical anomalies is important for treatment in cases involving fusion with supernumerary tooth, and therefore the microscopic examinations and CBCT are essential for the diagnosis. Fused teeth can be effectively managed by the comprehensive treatment which includes both endodontic and periodontal procedures.

Quinolone-resistant Shigella flexneri Isolated in a Patient Who Travelled to India

We report a recent case in which ciprofloxacin-resistant Shigella flexneri was isolated from a 23-yr-old female patient with a history of travel to India. Prior to her admission to our internal medicine department, she experienced symptoms of high fever and generalized weakness from continuous watery diarrhea that developed midway during the trip. S. flexneri was isolated from the stool culture. Despite initial treatment with ciprofloxacin, the stool cultures continued to show S. flexneri growth. In the susceptibility test for antibiotics of the quinolone family, the isolate showed resistance to ciprofloxacin (minimum inhibitory concentration [MIC], 8 microg/mL), norfloxacin (MIC, 32 microg/mL), ofloxacin (MIC, 8 microg/mL), nalidixic acid (MIC, 256 microg/mL), and intermediate resistance to levofloxacin (MIC, 4 microg/mL). In molecular studies for quinolone resistance related genes, plasmid borne-quinolone resistance genes such as qnrA, qnrB, qnrS, aac(6')-Ib-cr, qepA, and oqxAB were not detected. Two mutations were observed in gyrA (248C-->T, 259G-->A) and 1 mutation in parC (239G-->T). The molecular characteristics of the isolated S. flexneri showed that the isolate was more similar to the strains isolated from the dysentery outbreak in India than those isolated from Korea.

Colorimetric comparison of single layered dental composite with double layered dental composite

OBJECTIVES: This study analyzed the difference in color caused by different thickness in enamel layer of composite resins when applied with single and layering placement technique, and evaluated if the results agreed with the shade guide from the manufacturers to verify reliability of the color matching process of the manufacturers. MATERIALS AND METHODS: For single composite resin samples, 6 mm diameter and 4 mm thickness cylindrical samples were fabricated using Ceram-X mono (DENTSPLY DeTrey) and CIE L*a*b* values were measured with spectrophotometer. Same process was done for layering composite resin samples, making 3 dentinal shade samples, 4 mm thickness, for each shade using Ceram-X duo (DENTSPLY DeTrey) and enamel shade resins were layered in 2 mm thickness and CIE L*a*b* values were measured. These samples were ground to 0.2 mm thickness each time, and CIE L*a*b* values were measured to 1 mm thickness of enamel shade resin. RESULTS: Color difference (DeltaE*) between single and layering composite resin was 1.37 minimum and 10.53 maximum when layering thicknesses were between 1 mm and 2 mm and 6 out of 10 same shade groups suggested by manufacturer showed remarkable color difference at any thickness (DeltaE* > 3.3). CONCLUSION: When using Ceram-X mono and duo for composite resin restoration, following the manufacturer's instructions for choosing the shade is not appropriate, and more accurate information for Ceram-X duo is needed on the variation and expression of the shades depending on the thickness of the enamel.

Bonding efficacy of cured or uncured dentin adhesives in indirect resin / 대한치과보존학회지

OBJECTIVES: This study examined the effect of the uncured dentin adhesives on the bond interface between the resin inlay and dentin. MATERIALS AND METHODS: Dentin surface was exposed in 24 extracted human molars and the teeth were assigned to indirect and direct resin restoration group. For indirect resin groups, exposed dentin surfaces were temporized with provisional resin. The provisional restoration was removed after 1 wk and the teeth were divided further into 4 groups which used dentin adhesives (OptiBond FL, Kerr; One-Step, Bisco) with or without light-curing, respectively (Group OB-C, OB-NC, OS-C and OS-NC). Pre-fabricated resin blocks were cemented on the entire surfaces with resin cement. For the direct resin restoration groups, the dentin surfaces were treated with dentin adhesives (Group OB-D and OS-D), followed by restoring composite resin. After 24 hr, the teeth were assigned to microtensile bond strength (microTBS) and confocal laser scanning microscopy (CLSM), respectively. RESULTS: The indirect resin restoration groups showed a lower microTBS than the direct resin restoration groups. The microTBS values of the light cured dentin adhesive groups were higher than those of the uncured dentin adhesive groups (p < 0.05). CLSM analysis of the light cured dentin adhesive groups revealed definite and homogenous hybrid layers. However, the uncured dentin adhesive groups showed uncertain or even no hybrid layer. CONCLUSIONS: Light-curing of the dentin adhesive prior to the application of the cementing material in luting a resin inlay to dentin resulted in definite, homogenous hybrid layer formation, which may improve the bond strength.

The effects of short-term application of calcium hydroxide on dentin fracture strength / 대한치과보존학회지

OBJECTIVES: This in vitro study investigated whether short-term application of calcium hydroxide in the root canal system for 1 and 4 wk affects the fracture strength of human permanent teeth. MATERIALS AND METHODS: Thirty two mature human single rooted mandibular premolars in similar size and dentin thickness without decay or restorations were hand and rotary instrumented and 16 teeth vertically packed with calcium hydroxide paste and sealed coronally with caviton to imitate the endodontic procedure and the other 16 teeth was left empty as a control group. The apicies of all the samples were sealed with resin, submerged in normal saline and put in a storage box at 37degrees C to mimic the oral environment. After 1 and 4 wk, 8 samples out of 16 samples from each group were removed from the storage box and fracture strength test was performed. The maximum load required to fracture the samples was recorded and data were analysed statistically by the two way ANOVA test at 5% significance level. RESULTS: The mean fracture strengths of two groups after 1 wk and 4 wk were similar. The intracanal placement of calcium hydroxide weakened the fracture strength of teeth by 8.2% after 4 wk: an average of 39.23 MPa for no treatment group and 36.01 MPa for CH group. However there was no statistically significant difference between experimental groups and between time intervals. CONCLUSIONS: These results suggest that short term calcium hydroxide application is available during endodontic treatment.

Production of Interleukin-5, Interleukin-13 and Interferon-gamma in Peripheral Blood CD8+T Cells from Children with Wheezing / 소아알레르기및호흡기학회지

PURPOSE: Our objective was to investigate the role of CD8+T cells in pathogenesis of wheezing in children with atopic nature. METHODS: Twelve atopic wheezers, 8 nonatopic wheezers, 8 disease controls and 8 healthy controls were enrolled in the study. We isolated CD8+ T cells from peripheral blood samples, incubated them for 72 hours either in the absence or presence of phytohemagglutinin (PHA) and compared the concentrations of interleukin (IL)-5, IL-13, and interferon (IFN)-gamma in the cell culture supernatants. RESULTS: In the atopic wheezer group, the IL-5 concentration was significantly higher after PHA stimulation than after non-stimulated incubation. This difference was not observed in the nonatopic wheezer, disease control and healthy control groups. IL-13 was undetectable in all of the cell culture supernatants. There was no significant difference in the IFN-gamma concentration between the PHA-stimulated and non-stimulated conditions in all 4 groups. CONCLUSION: The results of this study suggest that CD8+ T cells may play a role in the pathogenesis of wheezing in children with atopic nature through the production of IL-5.

Sequence analysis of the S1 glycoprotein gene of infectious bronchitis viruses: identification of a novel phylogenetic group in Korea

Twelve Korean infectious bronchitis viruses (IBVs) were isolated in the field from chickens suspected of being carriers of infectious bronchitis between 2001 and 2003. The S1 glycoprotein genes of these IBV isolates were amplified by reverse transcriptase-polymerase chain reaction (RTPCR) and analyzed by restriction fragment length polymorphism (RFLP) analysis. These Korean IBV isolates were classified into three groups according to their RFLP patterns obtained using the restriction enzyme HaeIII. Half of the twelve isolates were similar to the KM91 RFLP pattern, which is a common pattern in Korea. Three more isolates were related to the Arkansas strain pattern, but with some unique variations. The other three viruses showed variant RFLP patterns. For a comparison with the published sequences for non-Korean IBV strains, amplified PCR products from the twelve isolates were cloned and sequenced. The Korean IBV field isolates had 71.2-99.7% nucleotide sequence homology with each other and 45.9-80.7% nucleotide sequence homology with non-Korean IBV strains. With respect to the deduced amino acid sequence, the Korean IBV isolates had 71.5-99.3% similarity with each other and 44.9-80.3% similarity with non-Korean IBV strains. Phylogenetic tree analysis revealed that some of the IBV isolates appear to belong to a new group, different from the non-Korean IBV strains or from previously isolated Korean IBV strains. Specifically, the new Korean IBV isolates K10217-03, K3-3 and K1255-03 represented a separate group. These findings suggest that the Korean IBVs appear to be continuously evolving.

Antitumor Activity of Oxaliplatin, 5-FU and Paclitaxel Given Alone or in Combination with ZD1839 in Human Gastric Carcinoma Cells in vitro / Journal of the Korean Cancer Association, 대한암학회지

PURPOSE: Oxaliplatin (LOHP), 5-FU, and paclitaxel (PTX) are considered highly active against advanced gastric carcinomas, and the epidermal growth factor receptor (EGFR) tyrosine kinase inhibitor, ZD1839 is considered as a good candidate for the treatment of gastric cancers when given alone or in combination with cytotoxic agents. The present study evaluated the antitumor effects of these agents in SNU-1 human gastric cancer cells either alone or when given as a doublet (i.e., as a cytotoxic-cytostatic combination). MATERIALS AND METHODS: We selected SNU-1 cells that showed DNA mismatch repair (MMR) deficiency and EGFR overexpression. Growth inhibition was measured by MTT and by direct cell counting and cell cycle distribution by flow cytometry. The combination index (CI) was used to describe synergistic interaction. RESULTS: The four drugs showed IC50s ranging from 1.81 nM to 13.2microM. MTT assay appeared to underestimate the cytotoxicity of PTX, which was attributed to a significant resistant fraction (32%). LOHP and PTX induced G2/M arrest, 5-FU increased in S phase, and ZD1839 in-creased in G1 in a concentration dependent manner. PTX ZD1839 showed the greatest synergism and LOHP ZD1839 showed a similar result. The cell cycle effect of PTX was potentiated by the coadministration of ZD1839. A previously developed cytostatic TPi model was used to assess the contribution of cell cycle arrest to overall growth inhibition, and 64% and 80% of the overall growth inhibition was attributed to cell cycle arrest for LOHP and PTX, when exposed to 7.55microM and 10 nM for 72 hr, respectively. CONCLUSION: This study demonstrates the antitumor activity and significant cell cycle arrest effect of ZD1839 against human gastric carcinoma cells and its synergistic interaction with LOHP and PTX. These results provide a preclinical rationale for the clinical development of ZD1839 and its use in combination with LOHP or PTX against human gastric cancers that express EGFR.